R-Type
R-Type Ring gasket can be ordered to two different profiles, oval or octagonal in cross-sections. Both types have identical pitch diameter as the flange groove they correspond to. These gaskets are used in pressures up to 10,000 PSI. The octagonal type has a higher sealing coefficient than the oval, therefore being the better gasket of the two. The oval type is the only gasket that will fit a bottom radius groove. Newer style flanges with flat bottom v-grooves will accept either style.
RX
RX gaskets are designed for pressures up to 15,000 PSI. These gaskets are interchangeable with r-oval or r-octagonal rings used on API 6B flanges. RX types of gaskets are more costly than your standard oval or octagonal rings, therefore not as popular. RX type gaskets perform excellent in 6B flanged blowout preventer stacks, which requires the additional mass of the RX gasket to support the higher pressures with higher vibrations and heavier weights of these units.
BX Series
Although similar in style to the octagonal gaskets, the BX Series can only be used with 6BX flanges and 16BX hubs. BX-Gaskets have been designed for higher-pressure ratings starting at 5,000 lbs. and ending with 20,000 lbs. Pitch diameters on BX gaskets are slightly larger than the pitch diameter of the flange. This forces the gasket to initially seal on its outside angles and secondly seal with its inside angles as the flange is bolted down to respective torque settings.
SRX & SBX Series
The American Petroleum has standardized the underwater utilization of ring gaskets with the SRX and the SBX series rings. There is no dimensional difference between the standard RX and SRX or the BX and SBX. They will fit into their appropriate flange designated numbers. The “S” prefix identifies a gasket as having intersecting vent holes, allowing a pressure less metal-to-metal initial contact between the gasket and flange groove, while made up underwater. For pressure class ratings on these gaskets refer back to their non “S” type standard gasket classification chart for the RX and BX-Series.
© Hire Torque and HTL® are registered Trademarks of Hire Torque Ltd 2015
Part of the HTL Group